新葡萄娱乐场网址

    News
    Location:Home > News

          

    PROTECTIVE VENTS

    背胶型防水透气产品

     

     Caron Protective Vents are designed to protect enclosures and devices from particles, water, oils, and other liquids without negatively affecting their operation. They are comprised of a filtration material and a pressure-sensitive adhesive ring for securing the vent to the device.

    新葡萄娱乐场网址背胶型防水透气产品用于保护外壳和设备免受颗粒、水、油和其他液体的影响,同时不会对其操作产生影响。 它们由透气膜和用于将透气膜固定到装置的压敏胶环组成

     

    FEATURES & BENEFITS(主要特点和优点)

    High efficiency particulate removal

            高效去除微粒

    Venting of gases and pressure equalization

            能够讓气体流过和进行压力均衡

    Eliminates the need for costly hermetic sealing

            高性价比,省去了昂贵的气密密封的需要

    Repels water, oils, and other liquids

            防水、油和其它液体

    Oil ratings from 1 to 8

            防油的等级分为1至8

    IP ratings from IP44 to IP67/IP68

            IP 的防护等级可从IP44 到IP67/IP68

    Easy application and device integration

            易于应用和设备集成

    Non-adhesive protective vents also available for welding to your device

            不带背胶的透气膜也可被用于焊接到设备上

    Standard and custom sizes and shapes are available

            标准化和自定义尺寸、形状都可供选择

    Caron's Vents provide protection with excellent sound transmission

            新葡萄娱乐场网址的防水透声膜,提供产品保护,并兼具出色的声音传输性

     

     STANDARD MATERIALS AVAILABLE 标准材料可选择

      The many options include Caron's proprietary white or black ePTFE membrane,woven, nonwoven,

            and extruded materials such as nylon, polyester, Polypropylene, and polyester/polyethylene.

           许多选项包括新葡萄娱乐场网址的白色或黑色ePTFE膜,纺布,无纺布和挤出材料,如尼龙,聚酯,聚丙烯和聚酯/聚乙烯

    Hydrophobic, oleophobic, and acoustic materials are available

           可提供疏水,疏油和声学材料

    Thickness: < 0.3mm (< 0.012")

            厚度:<0.3mm(<0.012“)

    Continuous Operating Temperature Range: -40° to 149°C (-40° to 300°F)

            连续工作温度范围:-40°至149°C-40°至300°F

    Minimum efficiency of 99.97% on 0.1 µm particles

            0.1μm颗粒上的最小过滤效率为99.97

      Material data sheets available upon request

            可根据要求提供材料物性表

     

    PACKAGING(包装方式)

      Manufactured, inspected and packaged in clean room environment

            在洁净室环境中操作,检查和包装

      Supplied on continuous release liner: 2000 - 5000 parts per polyethylene cores

            供应连续的离型纸:每一个聚乙烯卷芯带2000 - 5000个透气膜

      Roll sealed in cleanroom bag unless otherwise specified

            除非另有规定,将卷膜封入洁净袋子里

     

    PRODUCT OFFERINGS(产品展示)

    模式

    MODEL

    产品型号

    PART NUMBER

    透气量

    AIRFLOW

    (L/H/CM²@70mbar)

    耐水压

    WATER ENTRY PRESSURE(psi@30sec)

    疏油

    OLEOPHOBIC

    颜色

    COLOR

    厚度

    THICKNESS

     
     

    标准透气量Standard

    CRBV1657

    >20

     >14.5

    YES

    黄色 yellow

    0.13mm

     

    高透气量

    High Airflow

    CRP1950

    257

    >10

    YES

    白色 white

    0.19mm

     

    标准透气量Standard

    CRP1910

    35

     >14.5

    YES

    白色 white

    0.14mm

     

    标准透气量Standard

    CRP1943

    35

    >14.5

    YES

    黑色 black

    0.20mm

     

     

     HANDLING INSTRUCTIONS(操作说明)

    Wear gloves or use rounded tweezers when handling the vents

           操作透气膜时戴手套或使用圆形镊子

    Mounting surfaces should be clean and free of oils, particles, and other contaminants

           安装表面应清洁,无油污、颗粒和其他污染物

    Vents should be mounted on flat, vertical surfaces where liquids or other contaminants will not pool

           透气膜应安装在平坦,垂直的表面,液体或其他污染物不会聚集的地方

    Follow dispenser instructions when using an automated vent dispenser

           使用自动离型分配器时,请遵循分配器说明

    For manual vent dispensing, roll the liner under the vent until the vent extends beyond the liner and

            becomes easily accessible

           对于手动取下透气膜,在透气膜下方卷动离型纸,直到透气膜与离型膜分离

    Do not pry the vent from the liner or fold the vent, as this could damage the vent

          不要从离型纸上撬出透气膜或折叠透气膜,因为可能会损坏透气膜

     

     ASSEMBLY INSTRUCTIONS(装配说明) 

    Accurate placement of the vents can be improved by using markings, a recessed area, or a target area in which the vent is centered over the vent hole in the device or housing

           可以通过使用标记,凹陷区域或目标区域来改善透气膜在装置或壳体的精确放置

      Apply light finger pressure to the adhesive ring to seal the vent to the device or housing

           对粘胶环施加轻微的手指压力,以将透气膜密封到设备或外壳上

      Do not attempt to reposition the vent after installation. This can cause damage to the vents

           安装后不要尝试重新放置透气膜,这可能会损坏透气膜

      Allow at least 24 hours dwell time before using or testing the vent

           在使用或测试透气膜之前至少要放置24小时